Lumarro · Product support
Fit your number plate holder in four simple steps.
Installation video
Video coming soon. Follow the step-by-step guide below while we prepare the demonstration.
Before you start
Check the holder against your vehicle’s existing mounting points. If the screw holes line up, use those existing positions. If they do not line up, mark and make matching holes in the holder so it can attach to the vehicle’s existing screw holes. This means new holes in the holder, not new holes in your vehicle. Remove the holder before making holes, and check the screw fit before securing it.
Use suitable fixings for your vehicle. Tighten securely without overtightening or distorting the holder.
1 · POSITION & FIX
Position the empty holder straight and level. Align it with the mounting points, then screw the holder securely to the vehicle.
2 · BEND & INSERT
Slightly flex the number plate and insert it from one side into the holder. Use a gentle bend only; do not crease the plate or force it.
3 · SLIDE FULLY UP
Slide the plate fully upward into the holder’s upper channel. Make sure it sits evenly and is fully seated at the top.
4 · SLOT & CLICK
Fit the retaining lip’s side tabs first. Then push the lip inward until it clicks into place.
Final check
Check that both side tabs are engaged, the lip is clicked shut, and the plate and holder are secure before driving. If anything does not seat correctly, stop and check the alignment rather than forcing it.
Need a hand?
Use our contact page for product support. Include your order reference and a photo of the fitting if helpful.